|
|
 |
News |
|
Reasonable control of the radiation heat transfer through the choice of the original glass plate of |
Non-standard door is the weakest link in the entire building envelope, insulation, heat insulation, sound insulation, security. Therefore, how to improve its anti-thermal effects?
Reasonable choice of the original glass, and through the control of radiation heat transfer of non-standard doors.
Type: the original glass plate glass choice should be based on different parts of the glass.
LOW-E glass membrane surface location: membrane surface due to Low-E glass low-E features, use it to form a hollow glass, hollow glass membrane placed on different energy-saving features will have an impact.
The choice of materials of good thermal insulation properties of window frame materials of non-standard door is about 1/4 of the entire window area of the window frame material, the weak link in the entire system of non-standard door insulation.
The entire Windows airtight closed the performance of non-performance of the closed state of the exterior windows to the outside pressure, ability to prevent air infiltration into the interior of the standard door.
To improve the performance of foreign insulating glass spacer layer gas, widely used insulating glass chamber filled with argon and other inert gases, resulting in better energy-saving insulating glass.
Low conductive pads warm side of the interval of choice, improve the thermal conductivity of insulating glass edge.
Appropriate to increase the energy of the isolation layer thickness of the spacer layer thickness of the insulating glass to save a great deal of influence. Qingdao tempered glass
Of course, the inadequacies of these measures, but it is undeniable that it has increased to the insulation effect is largely a non-standard door, we will have more measures will be done, but I believe that these measures so far the best choice. |
|
|
